Demystifying Shower Unit Installation - Everything You Need To Know

Demystifying Shower Unit Installation - Everything You Need To Know

Blog Article

Schedule Free Estimate

Just how do you feel on the subject of Simple ways to Install a Shower Cubicle on Your Own?

A successful shower installment calls for careful planning and a lot of job. In most cases, you will require to do three kinds of tasks: mounting wall surfaces, setting up the plumbing, and also finishing wall surfaces.

Preparation

To start with, you should pick the type of shower that you want to install. It is essential to ascertain whether the selected shower is capable of managing certain systems and can control a safe level of water via the boiler. Many shower devices nowadays are made to be flexible to various water stress (such as stored warm water and also cold mains).
It is additionally important to take into consideration the water stress and also the planning of the piping and water drainage for the shower

Various Sorts Of Shower Units

Push-on Mixer: The hose and spray parts of the push-on mixer shower system can be attached to the bathroom tap according to your demand, and also the water temperature can be adjusted through the faucets. Push-on mixers are cheap and also extremely easy to set up. Nevertheless, although the tube link is straightforward, it is conveniently removed. In addition, it is bothersome to adjust the temperature level.

Bath/Shower Mixer: The hose and spray of this type of shower are integrated with a bath mixer tap, and the temperature can be changed with the bathroom faucets. It is an extremely low-cost choice as well as no added plumbing is entailed. Nevertheless, the bath/shower mixers likewise experience bothersome temperature level control alternatives.

Guidebook Mixer: The tube and also spray of a hand-operated mixer shower device belong of the wall surface device as well as the cold and hot water materials are linked to a single valve The temperature and pressure of the water are controlled through either one or a range of knobs (in extra pricey showers). Although temperature level control is a lot easier in manual mixer types, they are more expensive than the previously mentioned mixers. They also call for extra plumbing of cold and hot water system pipelines.

Thermostatic Mixer: The pipe and also spray of this shower kind belong of the wall surface system as well as the cold and hot water supplies are linked to a solitary shutoff right here as well. It is complete with an integrated stabiliser to self-adjust the water temperature and to prevent it from ending up being too hot. One of the biggest benefits of a thermostatic mixer shower kind consists of hassle-free temperature level control. Nonetheless, it is the most expensive of the different mixer options.

Power Shower: A power shower is a single device having an effective electrical pump that can changing both the water pressure as well as temperature. This kind of shower can be fitted if there is water system from a cold water tank as well as a hot water cylinder. A power shower makes the adjustment of both stress and also temperature level simple. On the other hand, it disagrees for water heated up directly by the shower or where the water is supplied by a mix boiler under keys stress.

Electric Shower: An electrical shower is plumbed right into a mains cold water supply and it heats the water electrically. It is essential to keep in mind that for this shower kind to be set up, the mains pressure needs to be at the very least 0.7 kg/sq centimeters (10lb/sq in). The device enables the temperature and stress to be readjusted by means of a knob. Versions with temperature stabilisers are much better as they continue to be untouched by other faucets in other places in use within the household. A significant disadvantage of electric showers is that the control knob just enables the option of heats at much less pressure, or lower temperature levels at a higher pressure. This is bothersome in the winter when the spray is frequently weak as well as the mains water is cooler. Nevertheless, this problem is taken on in some designs which are offered with a winter/summer setup.

Method

Relying on the kind of shower you wish to mount, the shower head should either be fitted in order to prevent its contact with the water in the bath listed below or the base tray, or it needs to have a check valve.
Prior to starting, it is suggested to mark the settings of the shower head and also control, as well as to intend the pipe-work included. Additionally, the drain system to get rid of the drainage will require to be planned. Both settings of the cable course and also the shower switch will likewise need to be taken into consideration if an immediate or electric shower device is being set up.
Use the instruction guide given with the shower system to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is important to cut off the water supply. In order to secure the pipes, they need to be provided a water-proof covering as well as also fitted with separating valves. The pipelines can then be hidden into the wall surface and glued over to neaten the total look.
Fit the base tray, shower head, and installations.
Connect the primary shower control to the pipes that will certainly be supplying the water (This may call for a female screw string adapter).
Reconnect the supply of water and also test the pipelines for any leakages, as some may require tightening up.
If you are mounting an electrical shower, bear in mind to turn off the electricity supply before making any type of electric connections. When these links have been made (there should be support within the user's manual), the power supply can be switched over back on.

Adjusting Water Pressure to Fit Your Shower

The cold water storage tank can be raised to a greater height (often just 150mm (6inches)) by installation a strong wooden support underneath it - perhaps made up of struts and also blockboards. If you choose this option, the major and also circulation pipelines will certainly additionally have to be raised to meet the new height of the reservoir.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is picked, it should be connected into the power supply in order to operate.

Piping and also Drain

It is best to utilize 15mm diameter supply pipes, and also make the runs to the shower as brief as well as straight as feasible so regarding preserve maximum stress as well as minimise warmth loss. Furthermore, by minimising making use of arm joints for pipeline edges, you can lower the resistance in the flow of the water. You can achieve this by bending the pipes rather.

Most Typical Blunders

Going against or overlooking neighborhood code restrictions.

Using pipelines that are too little.

Affixing copper to galvanized without making use of a brass or dielectric fitting between the two.

Not making use of tape or pipeline compound at threaded joints.

Not leveling your components when mounting them.

Not installing an air space filling up for components.

Reducing supply stub outs also brief to install the shutoff valves onto after the finished wall is in place.

Not correctly lining up tubing into fittings or stop valves. (Forcing the nut onto the compression ring at an angle when the tubing is at an angle will cause a leak.).

When transforming the water back on in your house, constantly run the outdoors tube shutoff or purge your commodes to bleed dust as well as air from the lines. This debris can cause troubles in your sink taps and also other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

As a fervent reader on How to Install a Freestand, I figured sharing that segment was really useful. Loved our write-up? Please share it. Help somebody else check it out. Many thanks for your time spent reading it.

Get An Estimate

Report this page